EMOS® Single Cell Temperature Evaluator
MONITOR AND CONTROL INDIVIDUAL CELL TEMPERATURES
The cell temperature depends on the performance of the individual cell. In an electrolyser the worst cell has the highest cell temperature and the best cell the lowest. Normally only the average cell temperature of the electrolyser is monitored by electrolyte outlet temperature measurement and controlled via electrolyte inlet flow and temperature. Cells with higher or lower temperature operate outside the best economic temperature range, and sometimes even outside the allowed temperature range, which can damage the membranes irreversibly and often requires an unplanned shutdown for maintenance.
The EMOS® Single Cell Temperature Evaluator calculates via heat balance the individual cell temperatures and allows the operator to adjust electrolyte flow/ temperature and/ or current to increase membrane lifetime, current efficiency and decrease power consumption.
The EMOS® Single Cell Temperature Evaluator accesses the electrolyser inlet flows and temperatures (inlet and outlet) via the OPC gateway from the DCS.
If you would like more information on this product, please Contact Us
EMOS® Single Cell Temperature Evaluator Datasheet
The EMOS® Single Cell Temperature Evaluator, as part of the EMOS® SIL2 Safety System, monitors the temperature of the individual electrolyzer cells.Info